Newsletter
Skype
Follow Milwaukee
Search
 |
Instruction Manual
|
 |
Print
|
|||||||||||||||||||||||||||||||||||||||||||
|
SMS420 Smart TDS Monitor with Cal-test button and with 0.5 TDS factor Milwaukee’s low cost durable meters for quick and reliable measurements. The Smart monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint. All these instruments run on a 12V adapter so there’s no need to worry about failed batteries. Smart monitors are very simple to operate: 1. Hang your monitor above your reservoir 2. Connect the adapter to the meter and plug in the power supply 3. Immerse 2/3 of the electrode in the solution 4. The electrode can now remain there permanently. The SMS420 is a reliable TDS monitor with a range of 0 to 199p ppm and 10 ppml resolution powered by a 12 VDC adapter. The SMS20 allows you to continuously monitor TDS values directly in your reservoir. The Cal-test feature will warn the user (through an LED) when the probe needs to be calibrated again! |
 |
|||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||
